Ultimate Arduino Kit with Genuine Arduino Uno R3

Ultimate Kit with Arduino Uno - The Most Arduino, The Most Fun!

Our kits continue to beat all the rest when it comes to quality components, and more value for your dollar...  and we have taken it to a whole new level with our New Ultimate Arduino Kit.

We've included everything from our Deluxe Kit and have added the following:

• Prototype shield with mini breadboard - excellent for prototyping
  
• Stackable headers
• ATMEGA328P with bootloader so you can build your own Uno-based board
• ATTiny85 - so you can build a tiny version
• 2 x IRLB8721 MOSFET for motor driving and switching
• L293D Motor control chip so you can build your own motor control board
• NOKIA 5110 Graphic LCD 84x48 
• DHT11 Temperature and Humidity Sensor
• Bluetooth Transceiver
• DC Motor with leads
• 1 x CP2102 USB to TTL/Serial Adapter Module
• 1 x Breadboard Power Supply Module 3.3V/5V
• 3 x 22pF ceramic disc capacitors
• 3 x 10uF Capacitors
• 1 x 16Mhz Clock Crystal

You can find out how to build a breadboard Arduino here - we supply the breadboard power supply module to make it easy to supply power to your Arduino. And we supply a CP2102 USB TTL device to make it easy to program your Arduino.

You can find our tutorial for using the Nokia 5110 here.

oddWires offers more value, high quality components and a great way into all the fun and creativity that's made possible by Arduino.

This kit enables you to perform a huge range of tutorials and other projects. But if you are looking for a smaller or lower cost kit take a look at these alternatives as we have a kit for every budget.

Here's a complete list of everything you'll receive in our best-selling and best-value Ultimate Arduino Kit. Here's where you can find our Arduino tutorials.

Arduino

• 1 x Genuine Arduino Uno R3

Prototype Board and Components

• 1 x Prototype shield with mini breadboard - excellent for prototyping
  
• 1 x Stackable headers
• 1 x ATMEGA328P so you can build your own Uno-based board
• 1 x 16Mhz Clock Crystal 
• 1 x ATTiny85 - so you can build a tiny version 
• 2 x IRLB8721 MOSFET for motor driving and switching 
• 1 x L293D Motor control chip so you can build your own motor control board 
• 1 x CP2102 USB to TTL/Serial Adapter Module 
• 1 x 40 Pin Header/Breakaway

Power

• 1 x 9V Battery box with 2.1mm connector - comes with on/off switch
• 1 x 9V-1A Power Adapter - US mains PSU for Arduino
• 4 x AA battery box - perfect for servo
• 1 x Breadboard Power Supply Module 3.3V/5V 

Sensors

• 1 x HC-SR04 Ultrasonic Range Finder 
• 1 x HC-SR501 PIR Motion Sensor 
• 1 x Sound Sensor Module
• 1 x Tilt / Ball switch
• 1 x LDR / Photoresistor 
• 1 x LM35DZ Temperature Sensor
• 1 x DHT11 Temperature and Humidity Sensor

Displays

• 1 x NOKIA 5110 Graphic LCD 84x48
• 1 x 1602 LCD Display Module

Modules

• 1 x RTC (Real Time Clock) Module (battery included)
• 1 x Relay Module 

Motors

• 1 x MG996 Servo Motor
• 1 x NEMA17 Stepper Motor
• 1 x L298N Stepper Motor Driver Board
• 1 x DC Motor with leads 

Breadboard and Wires

• 1 x 400 Point Breadboard
• 65 x Jumper Wires - various sizes and colors
• 10 x Male-Male Dupont wires
• 10 x Male-Female Dupont wires

Wireless / Remote Control

• 1 x Bluetooth Transceiver
• 1 x Infrared Remote controller 
• 1 x Infrared Sender 
• 1 x Infrared Receiver 
• 1 x 433Mhz tx/rx modules

LEDs

• 10 x 3mm Red LEDs
• 10 x 3mm Green LEDs
• 10 x 3mm Yellow LEDs
• 1 x 5mm RGB LED

Transistors

• 3 x 2N2222 NPN Transistor
• 1 x Phototransistor

Piezo Transducers

• 1 x Active Piezo Buzzer
• 1 x Passive Piezo Element

Joystick and Switches

• 1 x PS2 Joystick module
• 5 x Tactile Switches
• 1 x On/Off Switch

Resistors

• 2 x 10K trimmer potentiometers with knobs
• 10 x 220 ohm 1/4W 0.25W metal film resistors
• 10 x 330 ohm 1/4W 0.25W metal film resistors
• 10 x 1K ohm 1/4W 0.25W metal film resistors
• 10 x 10K ohm 1/4W 0.25W metal film resistors

Capacitors

• 3 x 22pF ceramic disc capacitors 
• 3 x 10uF Electrolytic Capacitors
• 3 x 100uF Electrolytic Capacitors