Loading... Please wait...

Li-Ion LiPo Lithium Ion Polymer Battery - 3.7v 2500mAh LP 785060

Hover over image to zoom

  • Image 1
  • Image 2
PKCELL
RRP: $14.95
$14.45
(You save $0.50)
SKU:
BAT-0002500
Weight:
1.80 Ounces
Shipping:
Calculated at checkout
Maximum Purchase:
8 unit(s)
Gift Wrapping:
Options available

Quantity Discount Per Item (contact us for larger quantities)

  • Buy 2 - 9 and pay only $14.40 each
  • Buy 10 - 99 and pay only $14.35 each

 Product Description

Lithium Ion Polymer Battery - 3.7v 2500mAh  **Please note - these can only ship via ground, see details below

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 2500mAh for a total of about 10 Wh. If you need a smaller battery, we also have a 1200mAh model.

The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry. Because they have a genuine JST connector, not a knock-off, the cable wont snag or get stuck in a matching JST jack, they click in and out smoothly.

The included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 3.0V. It will also protect against output shorts. However, even with this protection it is very important that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them and at a rate of 1200mA or less.
Like most lipos, the batteries we sell do not have thermistors built in. This is why we suggest charging at 1/2C or even less - 1200mA max in this case. Even 500mA is a good charge rate, which is how much you can get from a USB port.

Additional safety notes: Do not use a NiMH/NiCad/lead-acid charger! Also, do not abuse these batteries, do not short, bend, crush or puncture. As with all Lithium ion polymer batteries and with any power source - they should be used by experts who are comfortable working with power supplies.

 

Technical Details:

  • Weight: 52g
  • Size: 2" x 2.55" x 0.30" (51mm x 65mm x 8mm)
  • Output: 2500mAh at 3.7V nominal
  • PKCell
  • LP 785060

 

**Due to shipping restrictions on Lithium Batteries, we can not ship more than 2 per package via USPS First Class.  So, if you are ordering more than 2, please select FedEx Ground as your shipping method.  If this is not selected, we will notify you of the shipping cost difference. 

 Find Similar Products by Category

You Recently Viewed...

 

What's News

newsletter

Copyright 2019 oddWires. All Rights Reserved.
 Sitemap | oddWires

Click the button below to add the Li-Ion LiPo Lithium Ion Polymer Battery - 3.7v 2500mAh LP 785060 to your wish list.