Loading... Please wait...

Iot-Bus ESP32 CAN Bus

Hover over image to zoom

  • IoT-Bus ESP32 CAN Bus
  • This image shows the IoT-Bus Io (requires separate purchase). IoT-Bus CAN Bus pins are pin 4 (rx) and pin 5 (tx)
  • IoT-Bus ESP32 CAN Bus Schematic
oddWires
$9.95
SKU:
IOT-CANBUS1
Weight:
1.00 Ounces
Shipping:
Calculated at checkout
Gift Wrapping:
Options available

Quantity Discount Per Item (contact us for larger quantities)

 Product Description

IOT-Bus CAN Bus

Learn more about t here.

This IoT-Bus module provides a CAN bus transceiver that takes advantage of the built-in CAN bus controller in the ESP32. You will need either an IoT-Bus Io or IoT-Bus Proteus processor board. It can also be used with any ESP32 module that makes pin 4 and 5 available.

CAN Bus Termination

The board provides the ability to terminate with a 120 ohm resistor. If you are using two boards back to back you will need to terminate. This simply requires a solder blob between the terminate pins on board. Typically speeds up to 250K will work without termination. Above that it is essential.

Schematic

The CAN Bus schematic is shown below.

iot-bus-esp32-can-bus-schematic.png

 

 Find Similar Products by Category

You Recently Viewed...

 

What's News

newsletter

Copyright 2018 oddWires. All Rights Reserved.
 Sitemap | oddWires

Click the button below to add the Iot-Bus ESP32 CAN Bus to your wish list.